Suttner Ball Type Non-Rotating Sewer and Drain Nozzles 3/8 Inch Thread 4200psi

Suttner Non-Rotating "Ball Type" Sewer and Drain Nozzle 3/8 Inch Thread.

Models available include the following options:

• Three or more rear jet for propulsion and one forward jet to break up clogs.
• Three or more rear jets and zero forward for maximum penetration and propulsion.

Applications:

Ideal for 4” - 8" diameter lines. Suitable for up to 10" pipe.

Features:

• Hardened stainless steel
• Compact design ideal for maneuvering through tight elbows.
• Outside diameter: 0.920"
  
• 3 or 4 x Rear Jets
• *Optional 1 x Front Jet

Nozzle Orifice: Optional

Use the nozzle chart ad selection guide to match the flow rate (gpm) and pressure with your pump. Choose the closest match nozzle orifice based on your specs.

A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine and reduce performance.

Pro Tip** - For sewer jetting it is best to size the nozzle to allow the most flow possible so it's okay to choose a size larger than you would for pressure washer.

Best suited for use with sewer jetting hose.